View V23026A1005B201_4168040.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

The Best Relaytion
P1 Relay
ISO 9001
108-98009 Rev. C EC-JM00-0009-03 ECOC: JM10 1. Aug. 04
P1 Relay
1 pole telecom and signal relay, polarized, Through Hole Type (THT) or Surface Mount Technology (SMT),
Relay types: non-latching with 1 coil latching with 2 coils latching with 1 coil
V23026
Features
- Directly triggerable with TTL standard modules such as ALS, HCT and ACT - Slim line 13.5 x 7.85 mm, 0.531 x 0.309 inch - Switching current 1 A - 1 changeover contact (1 form C / SPDT) - Bifurcated contacts - Immersion cleanable - High sensitivity results in low nominal power consumption 65 to 130 mW for non-latching 30 to 150 mW for latching - Surge voltage resistance between contact and coil: - 2.5 kV (2 / 10 sec) meets the Bellcore Requirement GR-1089 - 1.5 kV (10 / 160 sec) meets FCC Part 68
Typical applications
- Automotive equipment CAN bus, imobilizer - Office equipment - Measurement and control equipment - Medical equipment - Safety equipment
Options
- FCC version on request. Testing of open contacts with surge voltage in accordance with FCC 68.302 (1.5 kV, 10/160 sec)
European Directive conformance:
P1 relay product conformance according to: Directive 2000/53/EC: ELV (End of Life of Vehicles) Directive 2002/95/EC: ROHS (Restrictions of the use of certain hazardous substances in electrical and electronic equipment) Compliance is evidenced by written declaration from all raw material suppliers. Tyco Electronics AXICOM only has responsibility for the proper processing of these materials. Confirmation is valid for date codes 0429
UL File No. E 111441 Basic insulation coil/contacts according to IEC/EN 60950 Clearance > 0.75 mm Creepage distance > 0.75 mm
Page 2 (10)
108-98009 Rev. C
P1 Relay
Dimensions
V23026-x1xxx-B201 THT mm inch mm
L W H T T1 T2 S S1 S2 13.0 0.1 0.512 0.004 7.6 0.1 0.299 0.004 6.9 - 0.2 0.272 - 0.008 3.5 - 0.2 0.138 -0.008 N/A N/A 5.08 0.15 0.200 0.006 0.3 0.1 0.012 0.004 N/A N/A N/A N/A
V23026
SMT inch
0.528 0.004 0.305 0.004 0.315 - 0.008 N/A 0.429 - 0.020 0.200 0.006 N/A 0.033 0.004 0.008 0.006
13.4 0.1 7.75 0.1 8.0 - 0.2 N/A 10.9 - 0.5 5.08 0.15 N/A 0.85 0.1 0.2 - 0.15
THT Version
SMT Version
Mounting hole layout
View onto the component side of the PCB
Solder pad layout
View onto the component side of the PCB
Terminal assignment
Relay - top view Contact release or reset condition, coil polarity to set the relay Non-latching type, not energized condition Latching type, 1 coil reset condition Latching type, 2 coils reset condition Contacts are shown in reset condition. Both coils can be used either as set or reset coil.
Page 3 (10)
108-98009 Rev. C
P1 Relay
Coil Data (values at 23C)
Nominal voltage Unom Operate/set voltage range Minimum voltage Umin Vdc Vdc Maximum voltage Umax Vdc Vdc
V23026
Ordering Information
Release/ reset voltage Minimum Coil power Coil Resistance Relay code Tyco part number
mW
/ 10 %
THT, non-latching, 1 coil 3 2.25 8.80 0.30 66 137 5 3.75 14.50 0.50 68 370 9 6.75 25.50 0.90 70 1165 12 9.00 35.00 1.20 64 2250 24 18.00 50.00 2.40 128 4500 THT, latching, 2 coils (coils I and II are identical) 3 2.25 8.55 2.25 69 130 5 3.75 14.75 3.75 64 390 9 6.75 26.00 6.75 68 1200 12 9.00 29.00 9.00 96 1500 24A nominal voltage of 24 V is feasible with a 12 V coil with a series resistor (1500 W) THT, latching, 1 coil 3 2.25 5 3.75 9 6.75 12 9.00 24 18.00 13.00 20.00 35.00 50.00 50.00 2.25 3.75 6.75 9.00 18.00 30 34 38 32 128 300 740 2160 4500 4500 113 313 1015 1800 4500 130 390 1200 1500 V23026A1006B201 V23026A1001B201 V23026A1005B201 V23026A1002B201 V23026A1004B201 V23026B1106B201 V23026B1101B201 V23026B1105B201 V23026B1102B201 1-1393774-7 0-1393774-1 1-1393774-5 0-1393774-2 1-1393774-2 0-1393775-3 3-1393774-4 0-1393775-2 3-1393774-5
V23026C1056B201 V23026C1051B201 V23026C1057B201 V23026C1052B201 V23026C1054B201 V23026D1026B201 V23026D1021B201 V23026D1025B201 V23026D1022B201 V23026D1024B201 V23026E1106B201 V23026E1101B201 V23026E1105B201 V23026E1102B201
2-1393774-6 2-1393774-0 2-1393774-7 2-1393774-1 2-1393774-4 0-1393776-8 0-1393776-3 0-1422015-9 0-1393776-4 0-1393776-7 0-1393777-3 0-1422015-6 0-1393777-2 0-1393776-9
SMT, non-latching, 1 coil 3 2.25 8.00 0.30 80 5 3.75 13.30 0.50 80 9 6.75 24.00 0.90 80 12 9.00 35.00 1.20 80 24 18.00 50.00 2.40 128 SMT, latching, 2 coils (coils I and II are identical) 3 2.25 8.55 2.25 69 5 3.75 14.75 3.75 64 9 6.75 26.00 6.75 68 12 9.00 29.00 9.00 96 24A nominal voltage of 24 V is feasible with a 12 V coil with a series resistor (1500 W) SMT, latching, 1coil 5 3.75 20.00 3.75 34 12 9.00 50.00 9.00 32 24A nominal voltage of 24 V is feasible with a 12 V coil with a series resistor (4500 W) Further coil versions e.g. 1.5 V, 9 V and 15 V are available on request.
740 4500
V23026F1051B201 V23026F1052B201
0-1422015-8 4-1393774-3
Coil operating range
65 mW 130 mW Umax. at 0 A Umax. at - 1 A Umax. at 0 A
Coil Voltage [U/Unom]
Unom. nominal coil voltage
Uop. min. Urel. min.
Ambient Temperature [C]
Page 4 (10)
108-98009 Rev. C
P1 Relay
Umax. - 5 % coil duty at 1 A
V23026
65 mW Latching 32 mW Latching
Coil Voltage [U/Unom]
Umax. - 100 % coil duty at 0 A
Unom = Umax. - 5 % coil duty at
0A
Nominal coil voltage Upper limit of the operative range of the coil voltage (limiting voltage) when coils are continously energized Lower limit of the operative range of the coil voltage (reliable operate voltage) Lower limit of the operative range of the coil voltage (reliable release voltage)
Umax. =
Unom. nominal coil voltage
Uset min.
Uop. min. = Urel. min. =
Ambient Temperature [C]
Contact Data
Number of contacts and type Contact assembly Contact material Limiting continuous current at max. ambient temperature Maximum switching current Maximum swichting voltage Maximum switching capacity Thermoelectric potential Initial contact resistance / measuring condition: 10 mA / 20 mV Electrical endurance at 12 V / 10 mA at 6 V / 100 mA at 30 V / 1000 mA Mechanical endurance UL/CSA ratings 1 changeover contact Bifurcated contact Palladium nickel, gold-rhodium covered 1A 1A 125 Vdc 150 Vac 30 W, 60 VA < 100 mV < 50 mW typ. 5 x 107 operations typ. 1 x 107 operations typ. 1 x 104 operations typ. 109 operations 30 Vdc / 1 A 65 Vdc / 0.46 A 150 Vac / 0.46 A
Max. DC load breaking capacity
Page 5 (10)
108-98009 Rev. C
P1 Relay
Insulation
Insulation resistance at 500 VDC Dielectric test voltage (1 min) between coil and contacts (Relay with 1 coil) between open contacts Surge voltage resistance according to Bellcore TR-NWT-001089 (2 / 10 ms) between coil and contacts (Relay with 1 coil) between open contacts according to FCC 68 (10 / 160 ms) between coil and contacts (Relay with 1 coil) between open contacts Insulation according to IEC / EN 60950 Clearance Creepage distance
V23026
> 109 W 1500 Vrms 500 Vrms
2500 V on request 2000 V
1500 V on request 1500 V Basic insulation 0.75 mm 0.75 mm
High Frequency Data
Capacitance between coil and contacts between open contacts RF Characteristics Isolation at 100 / 900 MHz Insertion loss at 100 / 900 MHz V.S.W.R. at 100 / 900 MHz max. 6 pF max. 5 pF
- 30.0 dB / - 18.0 dB - 0.12 dB / - 1.9 dB 1.06 / 1.75
General data
Operate time at Unom typ. / max. Reset time (latching) at Unom , typ. / max. Release time without diode in parallel (non-latching), typ. / max. Release time with diode in parallel (non-latching), typ. / max. Bounce time at closing contact, typ. / max. Maximum switching rate without load Ambient temperature Thermal resistance Maximum permissible coil temperature Vibration resistance (function) Shock resistance, half sinus, 11 ms Degree of protection / Environmental protection Needle flame test Mounting position Processing information Weight (mass) Terminal surface Resistance to soldering heat All data refers to 23 C unless otherwise specified. 1 ms / 2 ms 1 ms / 2 ms 0.4 ms / 1 ms 1.2 ms / 2 ms 1 ms / 3 ms 200 operations/s -40 C ... +70 C, +85 C on request < 130 K/W 85 C 20 G, 200 to 2000 Hz 40 G, 10 to 200 Hz 50 G (function) immersion cleanable, IP 67 / RT III application time 20 s, burning time < 15 s any Ultrasonic cleaning possible max. 2 g SnCu 0.7 260 C / 10 s
Page 6 (10)
108-98009 Rev. C
P1 Relay
V23026
Recommended soldering conditions
Soldering conditions according CECC 00802 Note: Internal relay termperature should not exceed 210 C
10 sec 20 - 40 sec 215 C Temperature C Temperature C 180 C 130 C
external preheating
Full line: typical Dotted line: process limits
max. 235 C 200 C 180 C 130 C
ca. 40 sec
100 C
forced cooling
Full line: typical Dotted line: process limits
Time (s)
Time (s)
Vapor Phase Soldering: Temperature/Time Profile (Lead Temperature)
Infrared Soldering: Temperature/Time Profile (Lead Temperature)
Page 7 (10)
108-98009 Rev. C
P1 Relay
Packing
V23026
Dimensions in mm
Tube for THT version - 40 relays per tube, 2000 relays per box
Tape and reel for SMT version - 480 relays per reel, 2400 per box
Reel dimension
Page 8 (10)
108-98009 Rev. C
P1 Relay
IM Relays
V23026
D2n Relays
2nd generation non polarized 2 c/o relay for telecom and various other applications. Nominal voltage range from 3 ... 48 V, coil power consumption from 150 .... 500 mW. The D2n relay is capable to switch currents up to 3 A. Dielectric strength fulfills the requirements according FCC part 68 (1,5 kV - 10 / 160 s). Dimensions approx. 20 x10 mm board space and 11,5 mm height.
4th generation slim line - low profile polarized 2 c/o telecom relay with bifurcated contacts, available as non latching or latching relay with 1 coil. Nominal voltage range from 1.5... 24 V, coil power consumption of 140... 200 mW, latching relays with 1 coil 100 mW. The IM relay is available as through hole and surface mount type (J-Legs and Gull Wings) and capable to switch loads up to 60 W/62,5 VA. Dielectric strength fulfills the Bellcore requirements according GR 1089 (2,5 kV - 2 / 10 s) and FCC part 68 (1,5 kV - 10 / 160 s). The IM relay is CECC/IECQ approved and certified in accordance with IEC/EN 60950 and UL1950. Dimensions approx. 10 x 6 mm board space and 5.65 mm height.
P1 Relays
P2 Relays
3rd generation polarized 2 c/o telecom relay with bifurcated contacts, available as non latching or latching relay with 1 or 2 coils. Nominal voltage range from 3 ... 24 V, coil power consumption 140 mW, latching relays with 1 coil 70 mW. The P2 Relay is available as through hole or surface mount type and capable to switch currents up to 5 A. Dielectric strength fulfills the Bellcore requirements according GR 1089 (2,5 kV - 2 / 10 s) and FCC part 68 (1,5 kV - 10 / 160 s). Dimensions approx. 15 x 7,5 mm board space and 10 mm height.
Extremely sensitive, polarized 1 c/o relay with bifurcated contacts for a wide range of applications, available as non latching or latching relay with 1 or 2 coils. Nominal voltage range from 3 ... 24 V, coil power consumption 65 mW, latching relays with 1 coil 30 mW. The P1 relay is available as through hole or surface mount type and capable to switch currents up to 1 A. Dielectric strength fulfills the requirements according FCC part 68 (1,5 kV - 10 / 160 s). Dimensions approx. 13 x 7,6 mm board space and 7 mm height for THT or 8 mm height for SMT version.
W11 Relays
FX Relays
3rd generation polarized 2 c/o telecom relay with bifurcated contacts, available as non latching or latching relay with 1 coil. Nominal voltage range from 3 ... 48 V, coil power consumption of 80 ... 260 mW for the high sensitive version, 140... 300 mW for the standard version, latching relays with 1 coil 100 mW. The FX2 relay is available as through hole type and capable to switch loads up to 60 W/62,5 VA. Dielectric strength fulfills the Bellcore requirements according GR 1089 (2,5 kV - 2 / 10 s) and FCC part 68 (1,5 kV - 10 / 160 s). The FX2 is CECC/ IECQ approved and certified in accordance with IEC/EN 60950 and UL1950. Dimensions approx. 15 x 7,5 mm board space and 10,7 mm height.
Low cost, non polarized 1 c/o relay for various applications. Nominal voltage range from 3 ... 24 V, coil power consumption 450 mW, sensitive versions 200 mW. The W11 relay is capable to switch currents up to 3 A. Dielectric strength 1000 Vrms. Dimensions approx. 15,6 x 10,6 mm board space and 11,5 mm height.
Reed Relays
FT2 / FU2 Relays
High sensitive, non polarized relay for telecom and various other applications, available with 1 n/o, 2 n/o or 1c/o contacts. Nominal voltage range from 5 ... 24 V, coil power consumption 50...280 mW for 1 n/o and 125 ... 280 mW for 2 n/o or 1 c/o versions. Reedrelays are available in DIP or SIL housing and capable to switch currents up to 0,5 A. Integrated diode and/or electrostatic shield optional. Dielectric strength 1500 Vdc. Dimensions approx. 19,3 x 7 mm board space and 5 ... 7,5 mm height for DIP or 19,8 x 5 mm board space and 7,8 mm height for SIL version.
3rd generation non polarized, non latching 2 c/o telecom relay with bifurcated contacts. Nominal voltage range from 3 ... 48 V, coil power consumption 200 ... 300 mW. Most sensitive 48 V relay. Available as through hole and surface mount type. Dielectric strength fulfills the Bellcore requirements according GR 1089 (2,5 kV - 2 / 10 s) and FCC part 68 (1,5 kV - 10 / 160 s). The FT2/FU2 is CECC/IECQ approved and certified in accordance with IEC/EN 60950 and UL1950. Dimensions approx. 15 x 7,5 mm board space and 10 mm height.
Cradle Relays
FP2 Relays
3rd generation polarized 2 c/o telecom relay with bifurcated contacts, available as non latching or latching relay with 1 or 2 coils. Nominal voltage range from 3 ... 48 V, coil power consumption of 80 ... 260 mW for the high sensitive version, 140... 300 mW for the standard version, latching relays with 1 coil 100 mW.. The FP2 Relay is available as through hole type and capable to switch loads up to 30 W/62,5 VA. Dielectric strength fulfills FCC part 68 (1,5 kV - 10 / 160 s). The FP2 is CECC/IECQ approved. Dimensions approx. 14 x 9 mm board space and 5 mm height.
Extremely reliable and mature relay family of 1st generation for various signal switching applications. Available as non polarized, polarized / latching and relay with AC coil. The benefit is the possibility of combining various contact sets from 1 up to 6 poles, single and bifurcated contacts, different contact materials with a coil voltage range from 1,5 Vdc to 220 Vac. Cradle relays are available as dust protected and hermetically sealed versions, with plug in or solder terminals and are capable to switch currents up to 5 A. Forcibly guided (linked) contact sets optional. Dielectric strength 500 Vrms. Dimensions from approx. 19 x 24 to 19x35 mm board space and 30 mm height.
Other Relays
MT2 / MT4
We offer a variety of different relay families for maintenance and replacement purposes. These relays are up to 60 years old now, such as Card Relay SN (V23030 / V23031 series), Small General Purpose Relay (V23006 series), Small Polarized Relay (V23063 ... V23067 and V23163 ... V23167 series). Accessories like sockets, hold down springs, etc. optional.
2nd generation non polarized, non latching 2 c/o and 4 c/o telecom and signal relay with bifurcated contacts. Nominal voltage range from 4.5 ... 48 V, coil power consumption 150/200/300/400 and 550 mW, and 300 mW (MT4). Dielectric strength fulfills the requirements according FCC part 68 (1,5 kV - 10 / 160 s) for both and the Bellcore requirements according GR 1089 (2,5 kV - 2 / 10 s) the MT4 only. Dimensions MT2 approx. 20 x 10 mm board space and 11 mm height, MT4 approx. 20 x15 mm board space and 11 mm height.
HF3 Relay
High performance low cost RF relay with excellent RF characteristics. Available with an impedance of 50 and 75 Ohm. Suitable for frequencies up to 3 GHz. Actually smallest RF relay available combining small size, excellent RF performance and SMD solderability. Available as non latching or latching relay with 1 or 2 coils and a nominal coil voltage range from 3 ... 24 V, coil power consumption 140 mW, latching relays with 1 coil 70 mW. Dimensions 14.6 x 7.3 x 10 mm.
Page 9 (10)
108-98009 Rev. C
Tyco Electronics AXICOM Ltd. Seestrasse 295 - P.O. Box 220 CH-8804 Au-Wadenswil / Switzerland Phone +41 1 782 9111 Fax +41 1 782 9080 E-mail: axicom@tycoelectronics.com
Tyco Electronics Paulsternstrasse 26 D-13629 Berlin / Germany Phone +49 30 386 38573 Fax +49 30 386 38575 E-mail: axicom@tycoelectronics.com
Tyco Electronics EC Trutnov s.r.o. Komenskeho 821 CZ-541 01 Trutnov / Czech Republic E-mail: axicom@tycoelectronics.com
Tyco Electronics Corporation POB 3608, Harrisburg, PA 17105, USA Phone +001 800-522-6752
Page 10 (10)
108-98009 Rev. C

▲Up To Search▲

Price & Availability of V23026A1005B201

	To Download V23026A1005B201 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .